| Body material | PC |
| Power supply | High efficient solar panel(5V/60mA) |
| Battery | Lithium battery(3.2V/500mAh) |
| LED | Ultra bright diameter 5mm( 6pcs) |
| LED color | Red, Yellow, Green, Blue, White |
| working mode | Recharging at day and working automatically at night |
| Flashing mode | Blinking or constant (charging at daytime and working automatically at night) |
| Life Span | 5years for Lithium battery; |
| Waterproof | IP68 |
| Visual distance | >500m |
| Working temperature: | -20°C-80°C |
| Load capacity | >15T |
| Size | 114*90*11mm |
| Weight | 120g |
Solar Road Stud. Solar-powered road studs also called solar road markers or known as solar road reflectors, are a kind of traffic safety warning lights with amber, yellow, green, red, blue, white color options. They are generally installed along the road or motorway surface.
Jun 29, 2016 - Solar road stud is mainly set in stone edge of the road, speed lane separated highway, generally used in combination with the standard line. See more ideas about
ONERAY Forklift Safety Light Blue Arc LED Warning Light Warehouse Pedestrian Warning Arch Zone Spotlight 20W DC10-80V for Truck Security Indicator Spotlight Brightness (New) $39.99. $39.
Solar powered LED stud lights have a small solar-panel set into the top face of the light. The panel is protected by a heavy-duty transparent face, which is designed to reduce the incidence of water and dust pooling over the panel and reducing its efficiency.
Overview Solar Roadways® panels have embedded LED lights to replace paint to make road lines and signage. In early development, it was quickly realized that creating panels with glass posed a problem: it wouldn’t work to paint road lines over the solar cells, or on glass. But that realization was quickly followed by the solution: since SR panels would be intelligent, it would be possible to
Quality Solar LED Road Studs manufacturers & exporter - buy Solar Road Stud ASD-004 6pcs LEDs Solar Road Marker Solar Cat's Lights Solar Accent Lights Solar Security
Battery type. ♦ 2'200mAh Li-Polymer ♦ High Temp Ranch (-25°C up to +80 °C) Endurance 1 LED. 1'650mAh (Li-Po) : NOKINA (1 LED) = 550 h (hours) Type of Solar cell. ♦ single Mono crystaline ♦ 50mm x 50mm (0,35Wp / 0,5V) Feature. Not suitable for driving over.
Viewing distance: over 500m. Colors: white, yellow, red, blue, green. Dimensions: 105x105x25mm. Weight: 400g. Installation procedures: Check if the solar stud charge and discharge is in the normal way. Identify the place and distance for installation and clean road surface. Clean the bottom of the solar stud and use epoxy glue to stick it onto
Alibaba.com offers 1,687 solar embedded road stud products. About 50% of these are Traffic Warning Products. A wide variety of solar embedded road stud options
YDM solar road stud Used in the parking lot in UAE. This is YDM's solar stud, installed in parking lot in UAE on 2014, as arrows indicate ,parking spaces logo. It has a hot weather here, the temperature is 40 to 50 degrees, the Land Surface Temperature up to 70 degrees, YDM's solar stud batteries withstood the high temperature ordeal, won the
Temperature range:-20℃ to 60℃. Size:110*90*32mm. Weight:350g. Features of aluminum solar road stud: – Proven reduction in night time accidents by over 70%. – Lower cost than traditional road stud reflectors. – 10 times greater visibility for drivers than glass reflective highway road maker.
The solar road stud can guide the drivers through automatic illumination, and only when the brightness reaches 2000MCD, the solar road stud is qualified. However, the reflective road stud can only give out light through the reflection of the light of the vehicles, which is lower in lamination quality than the solar road stud.
11/3/2019 · LED Road Stud Solar Powered also known as Road Reflector is designed to guide vehicles and pedestrians for directions. Powered by Solar Energy, it is more environmentally friendly and with a light feeling function, it automatically lights up when it turns dark. Guided by this light, people will be safe on the way. Our Road Stud is rated as IP68.
Active road studs use solar-powered LEDs to light up the road after dark. This improves road safety by allowing drivers to see 10x further than with cat's eyes. With the traditional cat’s eye road stud set for a rebrand after councils reported complaints over ‘cats eyes removed’ warning signs, it’s important we understand the difference between passive and active road studs.
Details : Absorb light 5-15 mins to shine over 8 hours. Without radiation, stable chemical properties, safety and economic. Durable in use, easy installation. Rain self-cleaning, inoxidizability, corrosion resistance, abrasion resistance, flame resistance. Gentle lights,disability glare. Fluorescent Reflective Plastic Road Stud.
